C-Net Accessories
What is BvNET?
BvNET is a fast networking technology for monitoring and controlling the DNC260(N) and the C5 DSP Amplifier.
BvNET uses Cat5 cabling to attach up to 119 devices using a simple cabling scheme without requiring any other network equipment such as hubs. The total span of the network may be at least 1 km without repeaters. There is no maximum length for a single span within this limit.
The Accessory Products
- C-Net Interface
- Accessory Power Supply
- Accessory Racking Kit
Features :
- Rugged steel enclosure
- Free-standing or rack-mount options
- Rugged Ethercon network connectors
- Compatible with standard RJ45’s
- Self-powered (using USB)
- Capable of driving 1km of network cable
- No special cables
This product allows your Personal Computer access to a network of BvNET enabled devices for control and monitoring them. It can connect via USB or Serial (RS232).
Housed in a convenient, rugged steel case, it can be used free-standing or, using the rack-mount kit, may be racked along with the companion Power Supply product and one other accessory product, all in just 1U of rack-space.
Computer System Requirements
Minimum requirements:
- PC with Pentium processor
- 32-bit Windows tm operating system (NT, 2000, XP, Vista).
- CD-ROM drive or Internet access
- RS232 or USB port
Typical Usage
You can connect your computer to the C-Net Interface using either RS232 (Serial) or USB. When using RS232, it is also necessary to use the Accessory Power Supply.
Alternatively, you can connect your computer to the C-Net Interface via USB as in diagram 2. It is not usually necessary to use a Power Supply to power the C-Net Interface when using USB, since USB will supply sufficient power for the Interface. If there are any Network powered devices on the network however, then the Accessory Power Supply will be required.
Simple Device Connectivity
Connect the BvNET Link socket on the C-Net Interface to the BvNET In socket of the first device you wish to control, then the BvNET Link socket of this device to the BvNET In socket of the next device, and so on. The order in which the devices are connected is not important. The ‘Ethercon’ network connectors are fully compatible with standard RJ45 Ethernet patch cables which may be used to make these connections. If additional ruggedness is required, we recommend using the Neutrik Ethercon locking type of connector.
C-Net Power Supply
This product is intended to provide DC power for the C-Net Interface, and is housed in the same style of case as the C-Net Interface.
- Can power one or two accessories
- Rugged steel enclosure
- Free-standing or rack-mount options
Accessory Racking Kit
The C-Net Interface and Accessory Power Supply may be used free-standing. If you wish to mount them in a 19-inch rack, then the Accessory Mounting Kit may be used. This comprises a panel for mounting up to three accessories in just 1U of rack space. Unused positions are neatly blanked-off. Brackets make the process of mounting the accessories quick and easy.