AP20 Specification

Type: 3-way self-powered full range multidesign system
Application: High level short throw or stage monitor
Frequency response: 60 Hz - 20 kHz (-3 dB)
Maximum SPL long term: 125 dB
Maximum SPL peak: 131 dB
Dispersion: 90° x 55°
Amplifier low range: Class D
Power output (RMS): 500 W into 4 Ω
Peak output current: >45 A
THD+N: <0.02% @ 500 W, 1 kHz, 4 Ω
Amplifier high range: Mosfet 100 W RMS, 200 W burst
THD+N: <0.02%
Components:  
Low frequency: 12" neodymium woofer
  3" (77 mm) voice coil, 500 W (AES)
High frequency: 2" neodymium coaxial driver
  3,5" (90 mm) + 1,75" (44,4 mm) VC, 150 W + 80 W AES
Crossover: 700 Hz 24 dB/O active, 6,3 kHz 18 dB/O passive
High pass filter: 44 Hz 18 dB/O
Input: Balanced
Connectors: 1x female XLR / TRS jack
  1x male XLR loop (pin2+,3-,1gnd)
Impedance: 10 kΩ
Input sensitivity: 0,775 V (RMS)
AC Connector: 2x Neutrik™ PowerCon (in/out)
AC power requirements: 1000W peak, 600W continuous (max)
LED Indicators: Power on, signal, 0dB, LF limit, HF limit, overload
Controls: Gain -12 dB to 0 dB
  Full range / Top mode, input phase
Enclosure shape: Multidesign
Suspension: 1x air cargo tracks and 8x M6 threaded points
Enclosure material: 15 mm birch plywood
Finish: Textured black paint
Dimensions (WxHxD): 348x594x390 mm
Net weight: 25 kg
© 2011 Coda Audio - all rights reserved - home | imprint